next »

[poyZONE]

Hello,
I want my hub to be removed from the hublist so I can add it again since it's marked as offline and in other contry ( the hub is current hosted in Romania ! ) . The hub address is dc.hyp.ro

Daniel

[Molotov]

OK.. fixed. 

[Mocorgo]

Hi


Please remove hub angyalkak.no-ip.org:4466

          Thanks

[Norco7]

Hello,
I want my hub to be removed from the hublist so I can add it again since it's marked as offline and in other contry ( the hub is current hosted in United States ! ) . The hub address is Rebas-place.zapto.org

[Molotov]

Hi


Please remove hub angyalkak.no-ip.org:4466

          Thanks

I need the ID of the hub to be able to remove it.. 

[Marthless]

Hello, please remove my hub from the list because I want to add it again, or please send me a new password to the PW. I'll be very grateful for that.

My ID is: 13423


Best Regards
Marthless

[Mckinley]

The rear bearing should not come out the front side. It should say in the rear in its race behind the rear seal.

If you got everything out the front including the bearing it should slide off?
Try lifting the rear slightly as maybe the seal is hung up on the spindle. Will the rotor and hub assembly turn / spin on the spindle still?
Only think I can think off is the rear bearing has seized to the race and the spindle. If so its going to take a lot of force to remove as you will need to either detach one or pull the race out of the hub. If this is the case the rotor and hub should not spin.